Submitted by brad on Sat, 2005-07-16 15:18.
As I noted earlier, last weekend I was at Oregon Country Fair, which is a great time. OCF has permanent facilities and has become more popular than it wants to be. All the booths, including food, have to be juried in and can in theory be kicked out to allow new ones in if popularity drops.
This results in much, much better food boths than you see at a typical random fair with vendors coming in simply if they pay their money.
And I wondered, can we extend this concept into the everyday restaurant world? For example a food mall, where the restaurant tennants are regularly judged for quality, and kicked out if they don’t make the cut. Where you are assured a good meal at a reasonable price. If the idea works, people would go to this mall and make it worth the effort by the restaurants to stay.
This might work the same way movieplexes took over from solo cinemas. People go to a movieplex for the hot movie, but it often is sold out, so they go to a 2nd or 3rd or sometimes even 10th choice of what they want to see. This sells a lot more tickets and avoids people driving home without a movie at all — though in my case I still sometimes bail out. Here, you could go to the restaurant mall with a particular restaurant in mind, but know that if it’s too busy a fine meal is assured unless the whole mall is packed. There could even be a central line for “the next available restaurant.”
Has this been done before? And what about going further and combining facilities… read more »
Submitted by brad on Tue, 2005-07-12 12:02.
I recently visited the Oregon Country Fair, which among many other things has entertainment acts which pass the hat to earn their living. (OCF only costs about $13 to attend, not enough to pay much if anything to acts.) This is a pretty common setup.
And perhaps this has been done where I haven't seen it, but I was wondering about a solution to what one busker called the "magic disappearing audience trick." Most people don't put into the hat. So along the lines of my microrefunds concept, where I suggest a solution may be to push people into making one decision, instead of many, over whether they will pay for things that don't have compulsory payment, I propose a system for busker fairs.
The plan would be for the Fair to raise their price and provide each fairgoer with "busker chips" to put in the hats of buskers. Once paid for, the chips would, at least officially, be good only for that. The Fair would also probably keep a small fraction of the money, ie. pay each busker 90 cents for each $1 busker chip turned in. People could of course also toss regular money into the hats.
These chips, aside from providing more revenue for the entertainment, would allow the fair to know what acts were the most popular, and thus who to bring back and who to leave out.
There are some other issues to discuss below. Such as the probable black market in the chips, and what price to charge for them... read more »
Submitted by Monty Zukowski on Wed, 2005-06-22 22:39.
First I would like to thank Brad for setting up my account so I can post my ideas here.
I own 80 acres of woodlands in Southern Oregon. I would love to be able to inventory every tree on it. Arial photos the county has of my property are not quite detailed enough, and they show the crown of the tree but not the size of the trunk. Seedlings are completely hidden.
Using a video camera I could do video panoramas at various spots on the property. To obtain depth would require either dual video cameras for parallax or a laser mounted a foot or so off of the side of the video camera. Dual video cameras would be out of phase with each other, and that would need to be accounted for in creating the depth information. Would a level's laser be powerful enough to see at 100' off of bark? If it were then the position of the laser spot on the video image would be an indication of the depth of the object.
Or maybe mount the camera on a sliding track. Leave the tripod in the same place, but the first pass has the camera in the center of tripod rotation, the second pass moves it a foot away from that center. Having a marker, like a stick with a reflector on it, at a fixed distance from the tripod (using a string) would help with calibrating and converging the images. Also by mounting the camera sideways I could get a little bit more vertical information since that would make the picture higher than it is wide.
I would print out a map beforehand and mark the spots roughly where I captured the panorama. I might even leave a stake in the ground for next year's inventory. My GPS doesn't work well under dense canopy, so I wouldn't rely on having it for this project. It might make it easier to process if I had a directional indicator, like always starting the panorama from magnetic north according to a compass. Leaving a colored stake in the ground and being sure to capture it on my next panorama would help align the panoramas as well.
From there a map should be able to be constructed. Each panorama would be turned into a disc on the map, with depth information showing how far the tree is from the center of the disc. Ideally the discs would overlap enough to have redundant information for some trees and the stakes, which would help align the rest of the trees on the map. The map should be able to show the trees and also areas of the property with "unknown" information, from which I could figure out what other spots would be good to take more panoramas from.
The panoramas themselves would be useful to see how the forest is changing over time. They could possibly be aligned and shown one above the other. In the ten years I've been here seedlings have grown taller than myself. I've thinned some areas, removing dense areas of small trees to allow just a few of the biggest trees to thrive, on the theory they will be getting more nutrients that the other seedlings are no longer "stealing."
This would also be a useful tool for monitoring timber sales to see the before & after of a harvest. There are many different ways to sustainably manage a forest. I would have a much better mental picture of the effects of various practices if I could really see the before and after of the work I do, in six or 12 month intervals. Forestry inventories are typically done by sampling a fixed area, counting stems and measuring their diameter at breast height. A tool like this could automate the capture of that kind of data, and help people get a good picture of what is going on in the forest.
Submitted by brad on Mon, 2005-06-20 12:09.
In much of the animal kingdom, mating involves the males putting on a display, and the females choosing the male they like, and the male pretty much always going off with the female who chooses him, certainly for a short interlude but also for a child-raising length of time.
In our closest relatives, the chimp and bonobo, there is extreme female promiscuity, with various theories as to why. In chimps, there is an alpha male but females will mate secretly with lessers. Bonobos do it with any other bonobo, any time, any place.
Humans have developed a system where more often the female worries most about display, though males certainly also do it. In most cultures, the male then selects the female he finds most attractive. The female then also decides if she wants that male or will wait for a better one.
The most dramatic example of the common animal mode is the peacock, who is all about display, and chosen by the rather plain peahen. The peacock is sexually selected for so much display his tail is actually a survival disadvantage.
So I am curious as to what would happen if an online dating service were built on the peafowl model. Which is to say only men would put up ads (display), possibly for free, and women would browse and contact the men they like (possibly having to pay to do so.) They could also include a reputation system for women to rate the men after dropping them, which some dating services are already playing with.
My question is, would this be a spectacular failure, or a surprising success, or just midling? It is common in dating systems to have the women pay less or nothing, and have the men bear the price. This is partly due to social norms and expectation about financial ability based in tradition. And in business, you do want to go where the money is. Men are also less protective of their identity in online dating, so they would just put their real contact info in the free part of their profile, not wanting the woman's non-payment to be a barrier. read more »
Submitted by brad on Wed, 2005-05-25 13:35.
Fast food outlets all have drive-throughs, and they are popular though sometimes it's hard to figure out why, since you get a slow simulation of being stuck in traffic. "Oooh, are we going to move! Yes, he's released his brakelights!" You may also have heard that McDonalds is outsourcing the order-taking part at some restaurants to teleworkers in the midwest, where wages are lower. (Not India, yet.) They reason that there is no reason the order-taker, who just punches the order into a computer, need be at the actual location, and in fact, when things are at their most busy, it makes sense to put everybody onto filling orders, not taking them.
You go to a board with a menu and a bad intercom to place your order. Why do this? Cell phone penetration is very high now, so why not phone it in? Either a direct number for that restaurant, or an 800 number where you can say which branch you are at or going to. You can't see the menu but you probably know it, and the order taker has the time to help you through it. They might be at the restaurant if they have spare capacity, or might be in a call center entering it on the computer. They can tell you pretty accurately when your order will be up.
Yeah, I just re-invented phone-in takeout, but this time based on the drive-through concept. Worst case you call it in while already at the restaurant, which is where you order today. But if you think about it, you're phoning it in on the way there. And they might tell you, "You know, it will be 15 minutes here, and just 3 minutes at the branch down the road" to load balance.
Now when you get to the restaurant, you probably should just park in the lot and go inside for your order. But they could also have a parking area with an LED display with the order numbers (or even sufficiently unique suffixes of phone numbers) displayed to say who can now enter the drive-through lane for instant pickup.
And of course, if you want to pay on credit card, and they know you, you can even pick up the food without the timewasting cash-handover.
This makes more sense at make-to-order places than at McDonalds of course. And it can apply to more than fast-food, though usually only fast food places have computerized order management. Perhaps people might order better food if it were more convenient?
Submitted by brad on Fri, 2005-05-20 08:44.
As many of you may know, the rebate system is based on the idea that most folks will not get around to filling out a rebate form, or will fill it out improperly. Estimates run that 60% or more of people don't get their rebate. In some cases, the companies do everything they can to not redeem, some are even accused of illegal behaviour. Some companies are rumoured to be rejecting all rebates then only redeeming to those people who complain.
What this means of course is that they can give a very attractive rebate, in many cases selling the product below cost. We've seen rebates for the full purchase price in some cases.
Now this is actually good for you if you are very good at getting rebates back, because you get to buy a product below cost, subsidized by the people who aren't good at getting the rebates back, who ended up paying an above average price. It's a form of differential pricing. Those who care get a lower price, those who are richer and care less pay more.
So is the time ripe for a company that, for a fee, will do your rebate paperwork for you? Of course, you would still need to cut off the proof of purchase, check over the rebate for any special requirements (like signatures or serial numbers not found on the proof of purchase) and stuff them in a preprinted envelope, and get it to the post office in time to make it to the rebate paperwork house in time for them to mail it in to the vendor. (Not really the vendor, but the vender's outsourced rebate house.)
I imagine you would pay something like $5 plus some small fraction of the rebate, charged on your credit card, and refunded to your credit card if you don't get the rebate. That seems like a lot for what should be a few minutes work, but if you factor in the time required to fill out forms carefully, print envelopes, copy receipts and other items, and get to the mailbox, I think it's not out of line.
Of course for the rebate facilitator, they are even more efficient. They have all your relevant info on file, filled out in a web form. They have all the popular rebates similarly encoded and scanned. They can either automatically print out a rebate form with your info clearly filled in, or they can print a custom sticky label with your info and apply it to the original if the original is needed.
They can copy the receipts and scan the proof of purchase. And then mail them out at bulk postage rates to the rebate center, or even have staff who hand deliver them to the major rebate centers in certain cases if volume is high enough. read more »
Submitted by brad on Wed, 2005-04-13 07:13.
It seems that whenever you have a popular event, notably concerts in smaller venues and certain plays, the venue sells out their tickets quickly, and then ticket speculators leap in and sell the tickets at high margins. Ticket speculating (aka scalping) is legal in some areas and illegal in others. I don't think it should be illegal, but I wonder why the venues and performers tolerate so much of the revenue going to the speculators.
Or am I wrong, and this is not happening? Is it the case that often the speculators miscalculate and lose money so they only make a modest income? It doesn't seem that way to me. Now, there are many ticket brokers with large web presences (including some who sponsor my joke site) and tickets are commonly auctioned on eBay.
So why don't the venues or ticket companies create their own auction sites to auction tickets, with some fair system like a dutch auction, and keep all the money from high-demand events for themselves? Is it simply because this seems elitist and they feel it will annoy fans?
Currently, fans are annoyed because speculators scoop up tickets to high-demand events as soon as sales open, and such events sell out quickly, before actual fans can get them. That seems far worse to me. An auction system would actually allow lesser tickets to sell for less money and generate the same revenue for the event.
This seems so obvious, why isn't it taking place? Is it simply inertia, or a fear of requiring computer access in order to get tickets? While just about anybody can get computer access these days, dutch auctions can be done by phone if you trust the 3rd party managing the auction. Call in once, set your maximum bid for the various ticket classes you will accept, then find out the resulting price later. People at computers would have a small advantage, but not that much. The venue could set a floor/reserve price if they don't want to cheapen the value of their product.
Or is this a business opportunity for some company (or for Ticketmaster?) read more »
Submitted by brad on Sat, 2005-04-09 18:51.
In this article about a wall-building robot we see another step towards automatic construction, moving the 3-D printer concept onto the grand scale. This is very interesting and could be expanded quite a bit. It notes that arms could add texture to ceramic walls, but I would go further.
Why not create a texturing head which consists of strong metal pins on high-speed servos. You could drag this over the surface of maleable material, moving the servos back and forth under computer control line raster lines. This would allow the generation of any digital image in 3-D on the wall to a limited amount of depth.
You could do simple things like textures, or pleasing graphics of plants or nice patterns, but sculptors could also generate interesting forms of art for people to place in 3-D on their walls.
This could also be done on modern drywall. A set of rails could be mounted on a wall. A robot would run on the rails, first applying stucco, then when it is at the right consistency, run the "print head" to place patterns or sculpture into the stucco.
You might be able to do full 3-D printing though I see that as harder to do on a vertical surface, by having a "stucco-jet" with various coloured ceramics in the pipes, and individually controlled pumps to push out the right material at the right time, possibly for further shaping by the servo-pins, though I suspect they would be better with monocolour.
Submitted by brad on Fri, 2005-03-25 07:10.
Here's a business idea for both mobile phone companies and people who operate those giant digital signs in public places (such as malls and the Times Square jumbotron.)
Let people text a message to the sign for a lucrative but affordable fee. It would then display ASAP, though possibly a human would have to check for "offensive" messages, whatever that means. You could see people putting up love notes to their valentines as they both go by the sign, rivals having battles and debates in their messages etc. Could be both entertaining and lucrative. The texted billboards (or from a web form with graphics) would contain a bar with the texting number or URL to enter your own. If it were cheap enough you might see crowds stopping to enjoy the battles on the jumbotron.
Submitted by brad on Tue, 2005-03-22 06:12.
For the past couple of years, I've been mulling over an idea for a different kind of DVD "rental" company, similar in ways to the popular NetFlix. Now I have encountered a new company called Peerflix which is doing something similar. Is it annoying or vindicating to see somebody else run with something? :-)
So instead I will comment on Peerflix, which I am going to try out, and what I planned to do differently.
The rough idea is a movie network that doesn't own the movies. The members do. The members declare what disks they have that are available to go out (key in or scan UPC codes or just put disks in drives) and, just like netflix, they also browse the list of DVDs and pick what they would like to rent. For each disk you have out, you are entitled to one in (approximately), and somebody close to you, who has the disk you want, is told to mail it to you.
Once scaled up, it's faster than netflix (the disk is mailed to you directly from the last person to have it, rather than going through the warehouse) but mainly it's vastly cheaper. In theory it could even run for free, with postage and mailers being the only cost -- plus of course the initial disks you introduce into the system. Netflix 3-at-a-time is $216/year, the one at a time is $120 per year.
There are, however, a number of interesting problems to solve in doing this, and some special factors you may not know about Netflix. read more »
Submitted by brad on Fri, 2005-03-18 11:10.
On a recent roadtrip, I did some “wardriving” where you scan for 802.11 (wifi) access points. Today they are everywhere. The scanning program lists the network name (SSID) as well as other information like the model of access point and whether it has encryption on. Often the SSIDs are informative, with the names of families and companies. Mine is an web address that would let a neighbour contact me.
All this happens because most access points transmit a regular “beacon” packet which lists their SSID and other information needed to connect to them. Seeing that the SSIDs were sometimes interesting, I wondered if we might do much more with a special beacon.
This beacon would deliberately tell you a bit about the access or location. It would contain a mixed XML/HTML packet with a variety of useful fields and general text. These could range from simple descriptions (“This access point belongs to Joe Smith, I’m a programmer”) to information (“On this site, Paul Revere stopped on his ride to consult with local minutemen”) to street directions (“Turn right to get to highway 101, left for downtown”) to, of course, advertising (“We sell fresh fruit and have a special on plums today.”)
In other words, a replacement for signs and billboards and markers. And perhaps much more. Access points would also talk about themselves, declaring, for example, if the owner is offering open internet access for free or for fee, or has a local database of information, and what classes of information are in the main text. The local lattitude and longitude for those without a GPS could be useful, along with local map data in a compact form.
Users could quickly get a program for their laptop (such as Netstumbler) to read and display such virtual annotations to the world as they drive. Primarily for passengers to use, of course. Eventually dedicated boxes would become available, and onboard car computers and GPS units could understand the protocol. Mass market access points would include a set-up screen in their web interface to let the owner enter the information beacon text and enable it. (Today some APs have open source firmware and an energetic programmer could do this right away.)
All of this might be both useful and entertaining. Children might enjoy reading all the random bits of information that flow by and stop asking “are we there yet?” The journey can become the reward. (Of course remember to look out the window sometimes.)
I can imagine vendors making a cheap solar powered access point that, during the day at least, sends out information beacons as soon as enough power is stored in the capacitors to send one. These could operate on a small, cheap solar cell (the more power, the more frequent the beacon) and be placed anywhere. “I’m an oak tree!”
Below, I will get into some technical issues and discuss the unanswered question, which is how to avoid abuse by excessive advertisement, spam and falsehoods. read more »
Submitted by brad on Wed, 2005-02-16 11:35.
Earlier, I wrote some proposals for improving ebay style feedback, including not having feedback revealed until both have left it. That has some flaws, but the main reason eBay is unlikely to do this is that eBay likes feedback to be positive, they want to convince buyers it is safe to shop there.
So here’s an alternate idea to prevent revenge feedback. Revenge feedback is only vaguely in eBay’s interests, in that the fear of it keeps feedback positive, but the existence of it adds to the negatives.
To solve this, attempt to detect revenge feedback and print statistics on it. What would be detected is negative feedback left by a seller on a buyer after the buyer has left negative feedback, but not if the buyer left this feedback immediately.
In theory the buyer has just one duty — to pay promptly. Indeed, since eBay owns PayPal they could also just report about buyers whether they paid promptly with PP and that should be all you need to know. Sellers might want to tag a “troublesome buyer” who has a lot of complaints after getting the item but I think that’s in an entirely different class of feedback anyway.
So really, a seller should leave feedback once the buyer has paid, and negative feedback only if the buyer pays slowly, pays falsely or doesn’t contact the seller.
Under my system above, if the seller waits to give feedback, in particular waits until after the buyer gives feedback, she’s taking a risk that her own negative feedback will get counted in the revenge count. And a high revenge count will scare away deals, deservedly.
More simply, the system could also just count how often the feedback came in the expected order (Seller’s first, then Buyer’s) and how often the other way around. This would strongly encourage sellers to feedback first. You would see when bidding that a seller always or rarely feedbacks on payment, and again, stay away from those who don’t.
Now admittedly, with the fear of revenge feedback gone, buyers would be more honest, and reputations would drop a bit. eBay might still want to avoid this, but with luck it would not be a big change.
Updated thoughts: It may be time for a 3rd party company to begin offering more detailed reputation information. Since eBay has stopped robots it doesn’t like, this would have to be on-client software which extracts results of transactions from eBay to another database that a browser add-on (like ShortShip) can display. All the useful information could be stored — feedback order, possible revenges, feedback based on dollar volume etc. Counting no-feedback transactions is harder and probably requires a blockable spidering operation or some complex shared network. To this one could add more feedback done outside of ebay, including revenge claims and full text stories that eBay doesn’t allow in feedback comments.
Useful hint: eBay doesn’t allow URLs in feedback, but if you invent a random string you can put ‘Search for randomstring’ in the feedback comment, and make a web page with that string in it that Google and the rest will find. Then people wanting to know more than 80 characters can learn it. Of course, the other party can also make a web page with that string so searchers see both sides, which is fine. A good non-random string might be something like eBay followed by the item number, as in ‘eBay130064299000’ — in fact, if such a method became common you could search for it without even needing it in the feedback.
Submitted by brad on Fri, 2005-02-04 11:30.
Here's a simple though not too exciting idea. Make bells for cat collars in different pitches. Thus you can always know which cat is coming just by sound.
Submitted by brad on Tue, 2004-11-16 08:05.
This is a science-fictional idea, but strikingly probable. You are probably aware the brain is split into two halves, joined by a nerve bundle called the corpus callosum. People with severe epilepsy have had the callosum severed, and ended up having two brains in one body. A left brain controlling the right half, and a right brain controlling the left half. The left brain can speak and can lie, the right brain can write with the left hand to communicate. Until experimenters tried to communicate with each half, the people were unaware they were sharing their body with another half-brain. You can read more details if you were unaware.
Anyway, on to the idea. It seems plausible one could apply a temporary anesthetic to the corpus callosum, and temporarily split a person into two brains. Today that might require drastic steps like brain surgery. In the future it's not hard to imagine a specialized drug or highly targetted drug delivery or nanobots to temporarily numb and disable the zone, without too much shutdown of adjacent tissue.
One could even imagine recreational use if it were safe and simple. It would be quite something to learn just what happens when you are split into two and then re-integrated, and how the reformed whole you would remember the two split experiences. Would your left and right half have a conversation? What would they talk about? How long could you persist in this state before it became difficult to reintegrate? How long after the cutoff would you be cogent enough to do all this (one presumes the cutoff might be a bit of a shock.)
Imagine an SF story where one half of the protagonist's brain decides it doesn't want to re-integrate with the other half, and takes steps to assure this...
Submitted by brad on Tue, 2004-10-05 08:52.
Ok, it's not like we're crying for a new word, since we already have so many: Generation Y, Generation Next, Boomlets, Echo-boomers, Millenials etc. But still, I like to throw out new words so mine is "Boomerangs" which nicely captures the concept of the rebound of the Baby Boom, and a few other concepts as well.
Submitted by brad on Mon, 2004-08-16 06:18.
At the Olympics, only in equestrian events do men and women compete on an equal footing, since it's about control of the horse, not strength. There used to be a truly mixed event in shooting (skeet and trap) but these were split in the 90s. (Perhaps shotgun experts will explain why this is, even though a woman won the last mixed event.) There are other mixed events -- Sailing, mixed doubles badminton, ice dancing, pairs skating, mixed doubles luge and so on, which are mixed by requiring a fixed number of men and a fixed number of women.
It would be nice to come up with some more events that can be truly mixed, but it's also pretty easy to design events mixed as defined by the rules. Mixed doubles tennis already exists. It's easy to imagine all sorts of "relay" sports with a mixed team in swimming, track and other sports. Ideally even a relay consisting of events women do particularly well at combined with events men do particularly well at. Team events are easy to mix as well, such as rowing, bobsled as well as baseball, basketball, voleyball etc. Many of the machine-based sports (car racing, motocross, etc.) don't show up in the olympics but can be, and are in some cases truly mixed.
So the idea, initially for the PR value, would be to create a games where all events are mixed in some way or another, with as many truly mixed events as possible. One imagines it should be able to get good TV ratings at least the first time for the novelty, which could turn into prizes good enough to attract top athletes to do the work of creating new teams.
In some cases, forming new teams would be trivial. 2 men and 2 women both experienced at relay racing for example, need learn very little to make a mixed relay team, and in fact mixed relays take place in amateur sport fairly regularly.
(Another interesting thought would be mixed relays of entirely different sports. One is depicted in one of the commonly running TV ads on the CBC. Some people have done relay Triathalon already, and the concept can be extended.)
I will add that I'm not trying to add more sports to the Olympics, which are already overflowing with events.
Submitted by brad on Sat, 2004-07-31 18:26.
Not really an invention, but I wrote up a nice article on living on 12 volt power without much generator use off the grid at Burning Man. Nothing really new, just some experience and advice, but I'm blogging it for those interested in the topic.
Submitted by brad on Wed, 2004-06-30 09:23.
People who speculate about the growth of cultures have wondered if our moon (which is unusually large compared to the host planet, at least based on the limited set of planets we can see) played a big role in our societies. Did it make us more aware of the sky than people who evolved on a moonless world would be, or a world with a small moon? Did the tides have an unusual affect on us beyond ordinary solar tides?
One thought did occur to me recently. The moon's rotation period is tidally locked, meaning the moon rotates at the same period with which it revolves around the Earth, and so it always presents the same face to the Earth. From our viewpoint, it does not appear to rotate at all.
Because of that, and because it's big enough to see with the naked eye, the features of the moon were fixed and visible to all generations of humans. We created the concept of "the man in the moon."
If the moon did have a visible rotation (ie. it was not tidally locked) it would be obvious to us. It would be obvious, in particular, that it is a sphere, and not a disk pinned to the sky as it appears to be.
So ancient astronomers would have seen the moon was a sphere and probably would have figured out much earlier that the sun, the other planets, and most importantly of all, the Earth itself, were a sphere. Perhaps more importantly, it would even be obvious to the common person. And what might that have done for the evolution of our technology and society?
Submitted by brad on Sat, 2004-06-05 14:48.
Later I will blog my observations on an attempt to do a 2 week working trip to Toronto, but before I do let me throw out and idea to make technomadism easier.
A network of condos, of similar value (with some exceptions) in the most interesting cities of the world. The condos would be "standardized" to include the following:
- A set of dressers with special removable drawers on rails. The drawers can be removed, lidded and slotted into a special packing crate for easy shipping.
- Special bookshelves also easily moved. Some would contain your mobile books and papers, others ones that go to storage on shorter trips.
- A standardized set of appliances, pots, pans, cutlery etc. as well as spices and a list of other dry ingredients to be kept in supply.
- Of course a high speed internet connection, wireless and wired
- A PVR modified to have a quick-remove hard drive as well as other home theatre and stereo equipment. Media server on network to play MP3s etc.
- One or two office rooms with large monitor and keyboard, basic printer.
- A nice collection of tools
- VoIP phone equipment ready to handle your permanent number plus a local number for you.
- A local cell phone account available for those from other countries.
- A wiki with information on the neighbourhood and city. Best nearby restaurants, stores, places to get things cheap as well as links to the more standard tourist sites.
- LCD or plasma panels to show photographs and other art.
- E-mail access to the natives and former tennants to ask questions not answered in the Wiki
- Of course, furniture.
The goal is a nearly painless move. Crate up your personal stuff (clothes and other special items) and any special tools and equipment you like. Slot the hard drive out of the PVR. Pack up your computer. It all goes in crates to send ground, you pack enough to live on in your suitcase since you will get there sooner.
(You'll find some similarities of goals in this to my earlier Ship of modern nomads concept.)
This way you can go to a new place with no fuss and minimal settling time, and work and live there. You will have what you need and access for how to find the things only natives know about. Your phone numbers and other access remain the same.
Members would buy into the system and get their "home" condo, plus pay extra for their share of common costs and the few spare condos needed to make the system work. Then they could move to an open condo in their class or lower (or higher for a fee) for fairly low moving costs.
Would people buy into this? Not those who have to put down roots, but those who want to see the world. read more »
Submitted by brad on Tue, 2004-06-01 04:02.
I am on the road in Toronto, so not a lot of blogging, but let me point to an idea that should spread. The Toronto Globe and Mail has a regular feature called Reality Check, where they take claims by politicians and officials, especially ones in negative ads, and research them.
Of course, it's easy to politicise such a task, finding flaws only in the party you don't like, but with proper checks and balances to produce objective journalism, I think every newspaper should have this, and featured prominently. Yes, we see it in blogs and mailing lists, but usually with bias. We need it in newspapers.